u s e r
m a n u a l
PDP2756X
PDP2762X
PDP27G1X
THOMSON
46, quai Alphonse Le Gallo
92648 Boulogne
Cedex FRANCE
It is important to read this instruction book prior to using your new product for the first time.
Es importante leer este manual antes de usar por vez primera su euipo.
TOCOM
End User License Agreement
End User License Agreement
EN
EN
IMPORTANT-READ CAREFULLY: This
End User License Agreement
LICENSE
LICENSE RESTRICTIONS
a) Except for the licenses expressly
granted to you in this Agreement, no
other licenses are implied.
e) The Program is provided with
"RESTRICTED RIGHTS". Use, duplication,
or disclosure by the U.S. Government is
subject to restrictions as set forth in
subparagraph (c)(1)(ii) of DFARS 252.227-
7013, or FAR 52.227-19, or in FAR 52.227-
14 Alt. III, as applicable.
a) You are granted the license (i) to use
the Program on a single workstation and
(ii) to make one (1) copy of the Program
into any machine-readable form for
backup of the Program, provided the
copy contains all of the original
("Agreement") is a legal agreement
between you and Thomson Inc.
("Thomson") for the Thomson Lyra
device application/driver software
program and associated
b) You may not (i) modify, translate,
reverse engineer, decompile, disassemble
(except to the extent that this restriction
is expressly prohibited by law) or create
derivative works based upon the Program
or (ii) copy the Program, except as
expressly permitted herein. You agree
that you shall only use the Program in a
manner that complies with all applicable
laws in the jurisdictions in which you use
the Program, including, but not limited
to, applicable restrictions concerning
copyright and other intellectual property
rights.
documentation, if any ("Program").
Program's proprietary notices.
TERM AND TERMINATION
a) The license is effective on the date you
accept this Agreement, and remains in
effect until terminated by either party.
ACKNOWLEDGMENT
BY INSTALLING THE SOFTWARE OR
CLICKING ON THE ACCEPTANCE BUTTON
OF THE SOFTWARE, COPYING OR
OTHERWISE USING THE PROGRAM, YOU
ACKNOWLEDGE AND AGREE THAT YOU
HAVE READ THIS AGREEMENT,
UNDERSTAND IT, AND AGREE TO BE
BOUND BY ITS TERMS AND CONDITIONS.
IF YOU DO NOT AGREE TO THE TERMS OF
THIS LICENSE AGREEMENT, CLICK ON THE
REJECTION BUTTON AND/OR DO NOT
INSTALL THE SOFTWARE AND/OR DO NOT
USE THE PROGRAM.
b) You may transfer the Program and
license, only as part of the Thomson Lyra
device, to another party if the other party
agrees to accept the terms and conditions
of this Agreement. If you transfer the
Program, you must at the same time
either transfer all copies to the same
party or destroy any copies not
b) You may terminate this license without
any notice or delay, by destroying or
permanently erasing the Program and all
copies thereof.
transferred.
c) If you use, copy, modify, or transfer the
Program, or any copy, in whole or part,
except as expressly provided for in this
license, your license is automatically
terminated.
c) The Program may contain pre-release
code that does not perform at the level of
a final code release. In this case, the
Program may not operate properly.
Updated versions of the Program can be
downloaded from
d) When the license is terminated, you
must destroy or permanently erase the
Program and all copies thereof.
d) Thomson is not obligated to provide
support services for the Program.
End User License Agreement
End User License Agreement
EN
EN
WARRANTY DISCLAIMER
OWNERSHIP RIGHTS
LIMITATION OF LIABILITY
WINDOWS MEDIA
THE PROGRAM IS PROVIDED "AS IS"
WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESSED OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO THE
IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, TITLE OR NON-
INFRINGEMENT. THE ENTIRE RISK AS TO
THE QUALITY AND PERFORMANCE OF
THE PROGRAM IS WITH YOU. SHOULD
THE PROGRAM PROVE DEFECTIVE, YOU
(AND NOT THOMSON, ITS SUPPLIERS, ITS
AFFILIATES OR ITS DEALERS) ASSUME THE
ENTIRE COST FOR ALL NECESSARY REPAIR
OR CORRECTION.
All title and intellectual property rights in
and to the Program and any copies
thereof are owned by Thomson or its
suppliers. All title and intellectual
property rights in and to the content
which may be accessed through use of
the Program is the property of the
respective content owner and may be
protected by applicable copyright or
other intellectual property laws and
treaties. This license grants you no rights
to use such content.
a) TO THE MAXIMUM EXTENT PERMITTED This version of the Lyra Personal Digital
BY APPLICABLE LAW, IN NO EVENT SHALL Player ("Lyra Player") contains software
THOMSON, ITS AFFILIATES, OR ITS
DEALERS BE LIABLE FOR ANY SPECIAL,
INCIDENTAL, INDIRECT OR
licensed from Microsoft that enables you
to play Windows Media Audio (WMA)
files ("WMA Software"). The WMA
Software is licensed to you for use with
the RCA/THOMSON Portable Audio
Device digital music player under the
following conditions. By installing and
CONSEQUENTIAL DAMAGES
WHATSOEVER (INCLUDING, WITHOUT
LIMITATION, DAMAGES FOR LOSS OF
PROFITS, BUSINESS INTERRUPTION,
CORRUPTION OF FILES, LOSS OF BUSINESS using this version of the Lyra Player, you
INFORMATION OR ANY OTHER are agreeing to these conditions. IF YOU
PECUNIARY LOSS) REGARDLESS OF CAUSE DO NOT AGREE TO THE CONDITIONS OF
OR FORM OF ACTION, INCLUDING
CONTRACT, TORT OR NEGLIGENCE,
ARISING OUT OF THE USE OF OR
INABILITY TO USE THE PROGRAM, EVEN
IF THOMSON HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
BECAUSE SOME STATES AND
THIS END USER LICENSE AGREEMENT, DO
NOT INSTALL OR USE THIS VERSION OF
THE Lyra Player.
This exclusion of warranty may not be
allowed under some applicable laws. As a
result, the above exclusion may not apply
to you, and you may have other rights
depending on the law that applies to you.
JURISDICTIONS DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF LIABILITY
OF CONSEQUENTIAL OR INCIDENTAL
DAMAGES, THE ABOVE LIMITATION MAY
NOT APPLY TO YOU.
b) YOU ASSUME RESPONSIBILITY FOR THE
SELECTION OF THE APPROPRIATE
PROGRAM TO ACHIEVE YOUR INTENDED
RESULTS, AND FOR THE INSTALLATION,
USE, AND RESULTS OBTAINED.
End User License Agreement
End User License Agreement
EN
EN
The WMA Software is protected by
copyright and other intellectual property
laws. This protection also extends to
documentation for the WMA Software,
whether in written or electronic form.
MICROSOFT IS NOT PROVIDING ANY
WARRANTY OF ANY KIND TO YOU FOR
THE WMA SOFTWARE, AND MICROSOFT
MAKES NO REPRESENTATION
CONCERNING THE OPERABILITY OF THE
WMA SOFTWARE.
THIRD PARTY SOFTWARE
GENERAL TERMS
ANY THIRD PARTY SOFTWARE THAT MAY This Agreement can only be modified by
BE PROVIDED WITH THE PROGRAM IS
INCLUDED FOR USE AT YOUR OPTION. IF
a written agreement signed by you and
Thomson, and changes from the terms
YOU CHOOSE TO USE SUCH THIRD PARTY and conditions of this Agreement made
SOFTWARE, THEN SUCH USE SHALL BE
GOVERNED BY SUCH THIRD PARTY'S
LICENSE AGREEMENT, AN ELECTRONIC
COPY OF WHICH WILL BE INSTALLED IN
THE APPROPRIATE FOLDER ON YOUR
COMPUTER UPON INSTALLATION OF THE
SOFTWARE. THOMSON IS NOT
RESPONSIBLE FOR ANY THIRD PARTY'S
SOFTWARE AND SHALL HAVE NO
LIABILITY FOR YOUR USE OF THIRD
PARTY SOFTWARE.
in any other manner will be of no effect.
If any portion of this Agreement shall be
held invalid, illegal, or unenforceable, the
validity, legality, and enforceability of the
remainder of the Agreement shall not in
any way be affected or impaired thereby.
This Agreement is the complete and
exclusive statement of the agreement
between you and Thomson, which
supersedes all proposals or prior
GRANT OF LICENSE. The WMA Software is
only licensed to you as follows:
You may use this version of the Lyra
Player containing the WMA Software
only with the Portable Audio Device
player.
The WMA Software is of U.S. origin. Any
export of this version of the Lyra Player
must comply with all applicable
international and national laws, including
the U.S. Export Administration
Regulations, that apply to the WMA
You may not reverse engineer, decompile, Software incorporated in the Lyra Player.
or disassemble the WMA Software,
except and only to the extent that such
activity is expressly permitted by
agreements, oral or written, and all other
communications between you and
Thomson, relating to the subject matter
of this Agreement.
applicable law in spite of this limitation.
GOVERNING LAW
You may transfer your right to use this
version of the Lyra Player only as part of a
sale or transfer of your Portable Audio
Device player, on the condition that the
recipient agrees to the conditions in this
End User License Agreement. If the
version of the Lyra Player that you are
transferring is an upgrade, you must also
transfer all prior versions of the Lyra
Player that you have which include the
WMA Software.
This Agreement is governed by the laws
of France, without regard to its conflict of
laws.
Table of Contents
Table of Contents
Radio . . . . . . . . . . . . . . . . . . .19
Selecting Radio Mode . . . . . . . . .19
Manual Tuning a Station . . . . . . .19
Preset Station . . . . . . . . . . . . . . . .19
Saving Preset Station . . . . . . .19
Selecting Preset Station . . . . . .20
Clearing Preset Station . . . . . .20
Suppressing Stereo Signal . . . . . .21
Record FM Radio . . . . . . . . . . . . .21
Selecting Recording Duration .21
Selecting Recording Destination22
View FM Recording . . . . . . . . . . .22
Delete FM Recording . . . . . . . . . .22
Installing Software . . . . . . . .30
Safety Information
Digital Music Operation . . . .14
EN
EN
Insert the Included CD-ROM into
CD-ROM Drive . . . . . . . . . . . . . . .31
Welcome Screen . . . . . . . . . . .31
Preferred Language . . . . . . . . .31
Install the USB Driver (Windows
98SE and Me Only) . . . . . . . . .32
Install Necessary Software . . . .32
End User License Agreement . .33
Install MusicMatch Jukebox . . .33
Install Additional Services . . . .34
Audible Welcome . . . . . . . . . .34
Rebooting the Computer . . . .34
Installation Completed . . . . . .34
Launch the MusicMatch Software 35
Selecting Music Mode . . . . . . . . .14
Music Playback Operation . . . . . .14
Play / Pause . . . . . . . . . . . . . . .14
Skipping Tracks . . . . . . . . . . . .15
Scan Tracks . . . . . . . . . . . . . . . .15
Stop Playback . . . . . . . . . . . . .15
Adjusting the Volume . . . . . . .15
Additional Music Features . . . . . .16
My Selections . . . . . . . . . . . . . .16
Adding Songs to My Selections16
Removing Songs from My
End User License Agreement
Table of Contents . . . . . . . . . . .1
Before You Begin . . . . . . . . . . .3
Unpacking Your Unit . . . . . . . . . . .3
What’s so special about this
mp3 player? . . . . . . . . . . . . . . . . . .3
Computer System Requirements 3
Precautions for the unit . . . . . . . . .4
Caution . . . . . . . . . . . . . . . . . . . . . .4
Caution While Driving . . . . . . . . . .4
Important Battery Information . . .5
Please Respect the Environment! . .5
Headset Safety . . . . . . . . . . . . . . . .5
Inserting battery into the player . .6
Using Headphones . . . . . . . . . . . . .7
How to Use Your Clip Budphones .7
How to Use Your Belt Clip . . . . . . .7
Connecting the Lyra Player to your
Computer . . . . . . . . . . . . . . . . . . . .8
Selections . . . . . . . . . . . . . . . .16
View My Selections . . . . . . . .16
Clear My Selections . . . . . . . .16
View Music Sub-Menu . . . . . . .17
Repeat . . . . . . . . . . . . . . . . . .17
Shuffle . . . . . . . . . . . . . . . . .17
DSP . . . . . . . . . . . . . . . . . . . .17
Voice Recording . . . . . . . . . . .23
Selecting Voice Mode . . . . . . . . . .23
Voice Recording . . . . . . . . . . . . . .23
Selecting Recording Duration .23
Selecting Recording Destination24
View Voice Recording . . . . . . . . .24
Delete Voice Recording . . . . . . . .24
Transferring Music . . . . . . . . .35
Connecting the Player to the
Computer . . . . . . . . . . . . . . . . . . .35
Transferring Files to the Lyra
Digital Audio Player . . . . . . . . . . .36
Transfer Files via MusicMatch
Audible File Operation . . . . .18
Audible Playback Operation . . . .18
Play / Pause . . . . . . . . . . . . . . .18
Skipping Sections . . . . . . . . . . .18
Scan Tracks . . . . . . . . . . . . . . . .18
Stop Playback . . . . . . . . . . . . .18
Adjusting the Volume . . . . . . .18
Line-in Recording . . . . . . . . . .25
Selecting Line-in Mode . . . . . . . . .25
Line-in Recording . . . . . . . . . . . . .25
Selecting Recording Duration .25
Selecting Recording Destination26
View Line-in Recording . . . . . . . .26
Delete Line-in Recording . . . . . . .26
Jukebox . . . . . . . . . . . . . . . . . . . .37
Transfer Files via Windows Explorer
(Drag and Drop) . . . . . . . . . . . . . .38
Disconnecting Your Lyra from
General Controls . . . . . . . . . . .9
Display . . . . . . . . . . . . . . . . . .11
the Computer . . . . . . . . . . . . . . . .39
File Management . . . . . . . . . .40
System Tray Applications . . . . . . .40
Profile . . . . . . . . . . . . . . . . . . .40
Menu Navigation . . . . . . . . . .12
Main Menu . . . . . . . . . . . . . . .12
Menu Navigation . . . . . . . . . . .13
System Settings . . . . . . . . . . .27
Settings . . . . . . . . . . . . . . . . . . . . .27
Memory Usage . . . . . . . . . . . . . . .27
Version . . . . . . . . . . . . . . . . . . . . .28
Troubleshooting Tips . . . . . . .41
More Information . . . . . . . . .28
Check for Updates . . . . . . . . . . . .28
Frequently Asked Questions . . . . .28
Troubleshooting Tips . . . . . . . . . .29
1
2
Before You Begin
Before You Begin
"Dear Thomson Customer,
EN
EN
with frequent static electricity or
electrical noise (e.g. speaker, TV set).
Clean the unit with a soft cloth or a
damp chamois leather. Never use
solvents.
What’s so special about
Thank you for purchasing the Thomson
this mp3 player?
Warning:
TM
!
Lyra
Digital Audio Player. This
•
This player is meant to play mp3, audible
product will play open mp3 and
This product is for your personal
use only. Unauthorized recording or
duplication of copyrighted material may
infringe upon the rights of third parties and
may be contrary to copyright laws.
(.aa) and Windows MediaTM audio files
recorded in the built-in flash memory
and SD/MMC card.
Windows Media™ audio (WMA) content
as well as content purchased from most
online music download services.
•
The unit must only be opened by
qualified personnel.
To do so, you need the use of a Windows
computer with USB port , connection
cable (included) and a music
management software (MusicMatch
Jukebox).
After purchasing and downloading
music to your PC, you are now ready to
move content to your player. To transfer
the music, you must use Windows Media
Player or the application recommended
by the online music download service.
Caution
Note
•
Keep product out of direct sunlight.
Exposure to direct sunlight or extreme
heat (such as inside a parked car) may
cause damage or malfunction.
Make sure the tracks are
encoded in mp3 or Windows Media
formats and supported bitrates.
Bitrates supported by the player:
mp3 – 48 to 320 kbps
Computer System Requirements
•
Pentium III 500MHz or higher
recommended
(Note: Services and applications must be
Windows Media audio-compliant and
support Digital Rights Management.)"
•
Do not expose to rain or moisture.
Macintosh iMac G3 or higher
Windows ®98SE, Me, 2000, or XP
Mac OS X Version 10.1.5 or higher
Internet Explorer 4.0 or higher
Internet access
•
wma – 48 to 192 kbps
Caution While Driving
Unpacking Your Unit
•
•
•
Use of headphones while operating an
automobile or moving vehicle is not
recommended and is unlawful in some
states and areas. Be careful and attentive
on the road. Stop operation of the unit if
you find it disruptive or distracting while
driving.
When you unpack your new player, be
sure you have removed all the
100MB free hard disk space for the
software
Precautions for the Unit
accessories and information papers. The
items below should have been packed in
the box with your player.
•
Do not use the unit immediately after
transportation from a cold place to a
warm place; condensation problem
may result.
Avoid shock to the unit especially
during recording. Recorded data may
be damaged.
Do not store the unit near fire, places
with high temperature or in direct
sunlight.
•
•
64MB RAM (128 MB recommended)
CD-ROM drive capable of digital
audio extraction
•
•
•
•
•
•
•
Lyra player
Music Management CD
USB cable
Line-in cable
Headphones
Belt clip
•
•
USB port (2.0 recommended)
Sound card
•
•
•
Neckstrap
Do not operate or store unit in places
4
3
Before You Begin
Before You Begin
EN
EN
Insert battery into the
player
1. To remove the battery door, gently
press on the battery compartment and
slide it in the direction of the engraved
arrow.
Important Battery
Information
Headset Safety
Have a Blast- Just Not in
Your Eardrums
•
When storing the unit , be sure to
remove the batteries because they
may leak and damage the unit.
Batteries may leak electrolyte if
inserted incorrectly, if disposed of in
fire, or if an attempt is made to
charge a battery not intended to be
recharged.
Note
Make sure you turn down
the volume on the unit
before you put on
headphones. Increase the
volume to the desired
Refer to the power level indicator on
display for battery level.
Replace with new batteries when the
indicator is empty. Refer to “Display
Overview” on page 11.
•
level only after headphone are in place.
•
•
•
Do not play your headset at a high
volume. Hearing experts warn
against extended high-volume play.
If you experience a ringing in your
ears, reduce volume or discontinue
use.
You should use extreme caution or
temporarily discontinue use in
potentially hazardous situations.
Even if your headset is an open-air
type designed to let you hear outside
sounds, don’t turn up the volume so
high that you are unable to hear
what s around you.
•
•
Never mix new batteries with old
ones. Do not mix battery types.
Discard leaky batteries immediately.
Leaking batteries may cause skin
burns or other personal injury.
Do not charge batteries which are not
intended to be recharged.
•
•
2. Lift up the battery compartment.
3. Insert a “AAA”(UM4) battery with
polarities corresponding to the
indications on the compartment.
4. Place the battery compartment to the
original position.
Dispose of batteries, according to
federal, state and local regulations.
Please Respect the
Environment!
Before throwing any
batteries away, consult
your distributor who may
be able to take them back
for specific recycling.
Your THOMSON product is designed and
manufactured with high quality materials
and components which can be recycled
and reused.
5
6
Before You Begin
Before You Begin
Using Headphones
How to Use Your Belt Clip
EN
EN
Connecting the Lyra Player
to your Computer
The belt clip supplied with the unit can
let you carrying the unit anywhere you
like.
Note
Insert phone plug into the headphones
Refer to the “USB Driver
Installation; MusicMatch
JukeboxTM Software” instruction
manual for procedures in setting up
USB drivers and transferring files
to the player.
1. Lift the rubber cover that is covering
jack (
) of the player for listening.
the USB socket on the player.
2. Insert the smaller end of the USB cable
into the socket on the unit tightly.
1. Replace the belt clip with the battery
compartment door.
Have a Blast- Just Not in Your Eardrums.
Make sure you turn down the volume on
the unit before you put on headphones.
Increase the volume to the desired level
only after headphones are in place.
Note
You must profile your
contents on your PC or on
the unit after file transfer in order
for the new files to appear in the
Navigation Menus. Refer to the
software instruction manual for
profiling details.
Caution:
Do not insert ear hook into
your ears.
How to Use Your Clip
Budphones
2. To remove the belt clip, place your
finger on the position indicated and push
it out from the battery compartment.
3. Insert the larger end of the
USB cable to the USB socket on
the back of the computer.
The right ear clip phone is labeled R
while the left ear clip phone is labeled L.
1. Slide the ear hook behind the ear with
the ear pad on the front of the ear.
3. Replace the battery compartment door.
2. For best sound quality, make sure the
earpad fits closely with your ear.
7
8
General Controls
General Controls
EN
EN
mic
10
12
8
7
13
1
9
3
4
2
6
11
5
4. OFF/STOP ( ) - Turns the unit off.
Press and hold in any mode to turn off
the unit.
11. CARD SLOT - Slot for external
1. Display - Shows user interface.
to the previous menu level.
memory card.
In music mode - Skips to the previous
song or the beginning of the current
song. Press and hold to scan backwards.
In radio mode - Scans down radio
frequency.
2. SELECT - Enters the selected menu
level. During menu navigation in music
mode - Tags an unselected item to be
included into the My Selections playlist.
Removes a selected item from the My
Selections playlist.
In music playback mode - Stops music
playback.
12. Headphones Jack ( ) - Insert the
headphones plug here.
In radio recording / line in recording /
voice recording mode - Stops recording.
13. Battery Compartment - Insert battery
here.
RIGHT ( ) - Enters the selected menu.
In music mode - Skips to the next song.
Press and hold to scan forward.
5. REC - Starts and pauses recording in
radio / voice / line in mode.
In radio mode - Selects the current radio
station as a preset station.
In radio mode - Scans up radio frequency.
6. MENU - Accesses the menu.
UP ( ) - Scrolls up when navigating
through the menu and moves the cursor
up.
In radio and music playback mode -
Increases the volume.
3. ON/PLAY/PAUSE (
) - Turns the unit
7.
unit
/
- Slide to lock and unlock the
on.
In music navigation mode - Starts music
playback.
8. Line in jack - Connects to other
auxiliary device.
In music playback mode - pauses and
resumes playback.
DOWN ( ) - Scrolls down when
navigating through the menu and moves
the cursor down.
In radio and music playback mode -
Decreases the volume.
In radio mode - Selects between preset
tuning and manual tuning.
9. USB port (
) - Attach the small
end of the mini-USB cable here.
10. Mic - Microphone for voice recording.
LEFT ( ) - In navigation mode - Returns
10
9
Menu Navigation
Display
Display Overview
The information in this section presumes
you’ve successfully transferred files to
your Lyra Digital Audio Player, and you’re
ready to play some music (refer to the
Software Instruction Manual).
Titles - Items are sorted according to the
5. The icon indicates the current
EN
EN
song title.
playing situation.
10
1
2
3
4
Genres - Items are sorted into folders
according to their genres.
6. In music mode, this section shows song
information.
7
5
In radio mode, station information is
displayed.
MySel (My Selections playlist) - Items
selected into the My Selections playlist
are listed in the order in which they were
added.
Main Menu
Main Menu is the main menu. The
navigation scheme is the same no matter
how many menus you access.
The main menu consists of the following
items:
6
7. The current file number / Total file
number
8
Radio Recs (Radio Recordings) - Radio
recordings are listed in the order they
were recorded.
8. The song elapsed time.
9. The song duration.
10. Memory card icon.
9
Folders
Artists
Albums
Titles
->
->
->
->
->
->
Voice Recs (Voice Recordings) - Voice
recordings are listed in the order they
were recorded.
Genres
MySel
1. The shuffle icon is displayed when
Radio Recs ->
random playback is selected.
Voice Recs
Line-in Recs ->
->
Line-in Recs (Line-in Recordings) - Line-in
recordings are listed in the order they
were recorded.
2. The repeat icon is displayed when the
repeat feature is activated.
Folders - Items in mp3, WMA and audible
- indicates repeat one song
- indicates repeat all songs in the
player.
format are listed.
Artists - The first level lists the artist
folders, the second level lists the Albums
for each artist and the third level lists the
songs from each artist’s albums.
3. The lock icon is displayed when the
key lock function is activated.
4. The battery indicator shows the
battery level.
Albums - Items are sorted into folders
according to the albums.
Note
You must profile your
When the battery is almost empty, the
icon blinks.
contents on your PC or on
the unit after file transfer in order
for the new files to appear in the
Navigation Menus. Refer to the
software instruction manual for
profiling details.
12
11
Menu Navigation
Menu Navigation
1. To Scroll up and down the menu and
move the cursor to items on screen,
press UP ( ) or DOWN ( ).
2. To enter and view the submenu, press
RIGHT ( ) or SELECT.
3. To go back to the previous menu level,
press LEFT ( ).
4. To return to the main menu at any
given time, press MENU.
Digital Music Operation
Selecting Music Mode
EN
EN
1. If the unit is in another mode, press
MENU to view sub-menu.
2. Use UP ( ) or DOWN ( ) to move
the cursor to Go to Music for music
mode and press RIGHT ( ) to select.
Tip
Go to Radio
Go to Voice
Go to Line-in
Repeat
You can also press and hold
ON/PLAY/PAUSE (
) to
Off
Off
Flat
toggle between music and radio
mode.
Shuffle
DSP
Clear MySel
Profile
Settings
Go to Music
Go to Radio
Settings
->
->
Mem Usage ->
Version
->
Music Playback Operation
Use the navigation buttons to select the
item to play.
Play / Pause
•
Once the item that you want to play
is selected, press ON/PLAY/PAUSE
(
) to begin playback. This
item can be an artist, an album, a
playlist, or a song.
•
•
Press again to pause playback.
Press ON/PLAY/PAUSE (
) again to
resume playback.
14
13
Digital Music Operation
Digital Music Operation
Skipping Tracks
Adjusting the Volume
EN
EN
View My Selections
Additional Music Features
•
To go to the previous track, press and
release LEFT ( ) .
•
To turn up the volume, press UP ( ).
The volume level shows briefly to
indicate the increase in volume level.
To turn down the volume, press
DOWN ( ). The volume level shows
briefly to show the decrease in
volume level.
1. From the main menu, use UP (
)
My Selections (My Sel)
- The song is not included in the My
Selections playlist.
and DOWN ( ) to move the cursor
to MySel.
•
To skip to the next track, press and
•
release RIGHT ( ) .
- The song is included in My Selections.
Titles
Genres
MySel
->
->
->
Scan Tracks
•
To scan backwards in the track that is
Tip
playing, press and hold LEFT ( ) .
To scan forwards in the track that is
playing, press and hold RIGHT ( ) .
2. Press SELECT to enter and view items
A
icon shows in front of
•
in MySel.
items that can be added into
the My Selections playlist.
Clear My Selections
1. In the MySel folder, press MENU to
Stop Playback
To stop playback, press OFF/STOP ( ) .
view music sub-menu.
DSP
Adding Songs to My Selections
The display returns to the previous menu
level.
Flat
1. In navigation mode, use UP ( ),
Clear MySel
Profile
Settings
DOWN ( ), LEFT ( ) and RIGHT
->
(
) to move the cursor to the song
Mem Usage ->
to be added to My Selections.
2. Press SELECT to tag it (only in
navigation mode).
Version
->
2. Use UP ( ) and DOWN ( ) to move
the cursor to Clear MySel and press
SELECT.
Note
You cannot tag any item in
folder mode.
Removing Songs from My
Selections
1. In navigation mode, use UP ( ),
DOWN ( ), LEFT ( ) and RIGHT
(
) to move the cursor to select the
song to be removed from My
Selections.
2. Press SELECT to remove it (only in
navigation mode).
16
15
Audible File Operation
Digital Music Operation
Scan Tracks
View Music Sub-menu
EN
Audible Playback
EN
Shuffle
•
To scan backwards in the file that is
Press MENU to view the music sub-menu
at any time in music mode.
1. From music sub-menu, use UP (
)
Operation
playing, press and hold LEFT ( ) .
To scan forwards in the file that is
playing, press and hold RIGHT ( ) .
and DOWN ( ) until the cursor is at
Use the navigation buttons to select the
item to play.
•
Shuffle.
Go to Radio
Go to Voice
Go to Line-in
Repeat
1. In music mode, press MENU to view
the music sub-menu.
Stop Playback
Repeat
Shuffle
Off
Off
To stop playback, press OFF/STOP ( ) .
Note
2. Use UP ( ) and DOWN ( ) until
the cursor is at Repeat.
The display returns to the previous menu
level.
Audible files can only be
selected in folder mode. (Not
available in Artist, Album, Titles and
Genre mode)
2. Press SELECT to select between
Shuffle Off (default) - Shuffle is off.
Go to Radio
Go to Voice
Go to Line-in
Repeat
Shuffle
Shuffle On
- Plays songs in the
Adjusting the Volume
•
To turn up the volume, press UP ( ).
The volume level shows briefly to
indicate the increase in volume level.
To turn down the volume, press
DOWN ( ). The volume level shows
briefly to show the decrease in
volume level.
player randomly.
Off
Off
Tip
3. Press SELECT to toggle among repeat
options.
Play / Pause
•
Shuffle On / Repeat One - A
•
Once the audible file that you want
to play is selected, press
song is selected randomly
from the current view and is played
repeatedly.
Repeat Off (default) - Repeat is off.
ON/PLAY/PAUSE (
playback.
) to begin
Repeat One
song.
Repeat All
- Repeats the current
- Repeats all the songs
Shuffle On / Repeat All - Songs in
the player are played in random
order repeatedly.
Skipping Sections
in the player.
•
To go to the previous section, press
and release LEFT ( ).
DSP
•
To skip to the next section, press and
1. From the music sub-menu, use
UP ( ) and DOWN ( ) until the
cursor is at DSP.
Note
release RIGHT ( ).
If Shuffle and Repeat
settings are changed when a
song is playing, new settings will
start when the current song is
finished playing.
DSP
Flat
Clear MySel
Profile
Settings
->
Mem Usage ->
2. Press SELECT to select among
Flat (default), Bass, Pop, Rock and
Jazz.
17
18
Radio
Radio
Selecting Radio Mode
Selecting Preset Station
EN
EN
If the unit is in manual mode, press
Tip
1. In any other mode, press MENU to
Note
ON/PLAY/PAUSE (
preset mode.
) to change to
Press and hold LEFT ( ) or
RIGHT ( ) for one second to
automatically search for the next
station in the respective direction.
view the sub-menu.
The unit must be in preset
mode so that “Clr Preset” is
displayed in the Radio sub-menu.
Go to Music
Go to Radio
Settings
->
In preset mode, press LEFT ( ) to select
the previous preset station and press
RIGHT ( ) to select the next preset
station.
2. Select Go to Radio for Radio mode.
Preset Station
Clearing Preset Station
Tip
Saving Preset Station
1. In preset mode, press MENU to view
Press and hold
1. Tune to the station to be saved as a
the radio sub-menu.
2. Use UP ( ) and DOWN ( ) to select
Clear Preset .
ON/PLAY/PAUSE (
) to toggle
preset station.
2. Press SELECT.
between music and radio mode.
Save as
Preset 05
Empty
Go to Music
Go to Voice
Go to Line-in
Clear Preset
Radio Modes:
Mode
Stereo
Manual Mode - Tuning to stations
3. Press LEFT ( ) or RIGHT ( ) to select
a preset number.
The current preset location blinks.
4. Press SELECT to confirm your
selection.
manually.
3. Press LEFT ( ) or RIGHT ( ) to
select the preset location to clear.
4. Press SELECT to confirm.
Preset Mode - Selecting stations saved in
preset memory.
Press ON/PLAY/PAUSE (
) to select
between Preset mode and Manual mode.
Manual Tuning a Station
•
Press LEFT ( ) to tune down radio
frequency.
•
Press RIGHT ( ) to tune up radio
frequency.
19
20
Radio
Radio
Selecting Recording Duration
Suppressing Stereo Signal
Selecting Recording Destination
EN
EN
1. From the radio sub-menu, use UP
1. From the radio sub-menu, use
If FM stereo reception is weak, select
mono sound to reduce the noise.
1. From the radio submenu, use
UP ( ) and DOWN ( ) to move the
cursor to Mode.
Note
(
)and DOWN ( ) to move the
UP ( ) and DOWN ( ) to move
the cursor to Rec Dest (Recording
Destination) (Available only when an
external memory card is inserted)
Radio recordings are saved
in mp3 file format. They can
be treated in the same way as other
mp3 music files.
cursor to Rec Dur (Recording
Duration).
2. Press SELECT or RIGHT ( ) to select
among Max, 60m, 30m and 5m.
2. Press SELECT or RIGHT ( ) to select
between Stereo and Mono sound.
RecDur
RecDest
Settings
Max
INT
->
Note
RecDur
Settings
Mem Usage ->
Max
Go to Music
Go to Voice
Go to Line-in
Clear Preset
->
Radio recordings can also be
found in FM directory under
folder option.
2. Press SELECT or RIGHT ( ) to select
between internal (INT) and external
(EXT) memory.
Mode
Stereo
Record FM Radio
Tune to the Station to be recorded.
Delete FM Recording
1. In the main menu, use UP ( ) and
DOWN ( ) to move the cursor to
Radio Recs (Radio Recordings).
2. Press SELECT or RIGHT ( ) to enter
the Radio Recs menu.
The first recording is listed first.
3. Press MENU when the cursor is at the
radio recording to be deleted.
4. Use UP ( ) and DOWN ( ) to move
the cursor to Delete File.
View FM Recording
•
•
Press REC to start recording.
Press REC to pause recording.
Press again to resume
Press OFF/STOP ( ) to stop
recording.
1. In the main menu, use UP ( ) and
DOWN ( ) to move the cursor to
Radio Recs (Radio Recordings).
•
Folders
Artists
Albums
Titles
->
->
->
->
->
->
Genres
MySel
Radio Recs ->
Voice Recs
Line-in Recs ->
->
Delete File
Settings
->
Mem Usage ->
2. Press SELECT or RIGHT ( ) to enter
the Radio Recs menu.
Version
->
The first recording is listed first.
5. Press SELECT to delete.
FM001.mp3
FM002.mp3
FM003.mp3
3. Press SELECT or RIGHT ( ) to play
the highlighted item.
21
22
Voice Recording
Voice Recording
3. Press SELECT or RIGHT ( ) to play
Selecting Recording Destination
Selecting Recording Duration
Selecting Voice Mode
EN
EN
1. From the voice sub-menu, use
1. From the radio sub-menu, use UP
the highlighted item.
1. In any other mode, press MENU to
UP ( ) and DOWN ( ) to move
the cursor to Rec Dest (Recording
Destination) (Available only when an
external memory card is inserted)
(
)and DOWN ( ) to move the
view the sub-menu.
cursor to Rec Dur (Recording
Duration).
Delete Voice Recording
1. In the main menu, use UP ( ) and
DOWN ( ) to move the cursor to
Voice Recs (Voice Recordings).
2. Press SELECT or RIGHT ( ) to enter
the Voice Recs menu.
Go to Music
Go to Radio
Go to Voice
2. Press SELECT or RIGHT ( ) to select
among Max, 60m, 30m and 5m.
RecDur
RecDest
Settings
Max
INT
->
2. Select Go to Voice for voice recording
mode.
RecDur
Settings
Mem Usage ->
Max
->
The first recording is listed first.
3. Press MENU when the cursor is at the
recording to be deleted.
Voice Recording
2. Press SELECT or RIGHT ( ) to select
between internal (INT) and external
(EXT) memory.
•
•
Press REC to start recording.
Press REC to pause recording.
Press again to resume
Press OFF/STOP ( ) to stop
recording.
Voice001.wav
Voice002.wav
Voice003.wav
•
View Voice Recording
1. In the main menu, use UP ( ) and
DOWN ( ) to move the cursor to
Voice Recs (Voice Recordings).
4. Use UP ( ) and DOWN ( ) to move
the cursor to Delete File.
Delete File
Folders
Artists
Albums
Titles
->
->
->
->
->
->
Settings
->
Mem Usage ->
Version
->
Genres
MySel
5. Press SELECT to delete.
Radio Recs ->
Voice Recs
Line-in Recs ->
->
2. Press SELECT or RIGHT ( ) to enter
the Voice Recs menu.
The first recording is listed first.
Voice001.wav
Voice002.wav
Voice003.wav
23
24
Line-in Recording
Line-in Recording
Selecting Recording Duration
Selecting Recording Destination
Selecting Line-in Mode
Delete Line-in Recording
EN
EN
1. From the radio sub-menu, use UP
)and DOWN ( ) to move the
1. From the line-in sub-menu, use
UP ( ) and DOWN ( ) to move
the cursor to Rec Dest (Recording
Destination) (Available only when an
external memory card is inserted)
1. In the main menu, use UP ( ) and
DOWN ( ) to move the cursor to
Line-in Recs (Line-in Recordings).
2. Press SELECT or RIGHT ( ) to enter
the Line-in Recs menu.
1. In any other mode, press MENU to
(
view the sub-menu.
cursor to Rec Dur (Recording
Go to Music
Go to Radio
Go to Line-in
Duration).
2. Press SELECT or RIGHT ( ) to select
among Max, 60m, 30m and 5m.
The first recording is listed first.
3. Press MENU when the cursor is at the
recording to be deleted.
RecDur
RecDest
Settings
Max
INT
->
2. Select Go to Line-in for Line-in
recording mode.
RecDur
Settings
Mem Usage ->
Max
->
Line001.mp3
Line002.mp3
Line003.mp3
Line-in Recording
2. Press SELECT or RIGHT ( ) to select
between internal (INT) and external
(EXT) memory.
Connect any source audio device from the
headphones output (F 3.5mm) with the
provided Line-in cable to the Line-in jack (F
2.5mm) at the side of your Lyra. You can
also connect the headphones to the Lyra
headphones output to monitor the
recording if required.
4. Use UP ( ) and DOWN ( ) to move
the cursor to Delete File.
Delete File
View Line-in Recording
1. In the main menu, use UP ( ) and
DOWN ( ) to move the cursor to
Line-in Recs (Line-in Recordings).
Settings
Mem Usage ->
Version
->
->
•
•
Start playback from the source audio
device
5. Press SELECT to delete.
Folders
Artists
Albums
Titles
->
->
->
->
->
->
Adjust the volume level of the source
audio device in order to achieve the
optimum recording quality. The
source output varies from model to
model. You might want to experiment
with a few recordings to determine
the proper volume output of the
source to get optimum recording
quality from the Lyra. Recommend
starting the source at a Volume level
that adequate at room Volume level.
Press REC to start recording
Genres
MySel
Radio Recs ->
Voice Recs ->
Line-in Recs ->
2. Press SELECT or RIGHT ( ) to enter
the Line-in Recs menu.
The first recording is listed first.
Line001.mp3
Line002.mp3
Line003.mp3
•
•
Press REC to pause recording. Press
again to resume.
•
Press OFF/STOP to stop recording.
3. Press SELECT or RIGHT ( ) to play
the highlighted item.
26
25
System Settings
Version
1. Press MENU to view the sub-menu.
2. Use UP ( ) or DOWN ( ) to move
the cursor to Version.
System Settings
EN
EN
Settings
Memory Usage
3. Press RIGHT ( ) or SELECT to view
1. In any mode, press MENU to view the Memory Usage (Mem Usage) shows the
firmware version.
sub-menu.
amount of free space on the memory.
Version 1.00
2. Use UP ( ) or DOWN ( ) to move
the cursor to Settings.
1. Press MENU to view the sub-menu.
2. Use UP ( ) or DOWN ( ) to move
the cursor to Mem Usage (Memory
Usage).
Version
RecDur Max
Settings ->
Mem Usage ->
3. Press RIGHT ( ) or SELECT to enter
RecDur Max
Settings ->
Mem Usage ->
the Settings menu.
More Information
Contrast
Backlight
0
5s
Red
3. Press RIGHT ( ) or SELECT to view
PowerSave 30s
FreqStep
Language
Flip LCD
US
Engl
memory usage information.
Check for Updates
Frequently Asked Questions
You can get FAQ information at
Built-in
latest news and firmware upgrades for
our Lyra Digital Audio Player. You must
update your system after new downloads
have been made in order for the new
applications to be executed.
Free: 109M
Total: 512M
Memory Card
Free: 129M
Total: 256M
4. Use UP ( ) or DOWN ( ) to move
the cursor to the setting you want to
change.
5. Press RIGHT ( ) or SELECT to
select among options for each setting.
Contrast: -5, -4, -3, -2, -1, 0, 1, 2, 3, 4,
5
Tip
The memory card usage will
only be displayed when an
external memory card is detected.
Backlight : 5s, 10s, 30s, on
Red, Blue, Purple
Powersave : Off, 1m, 3m, 5m
Freq Step : US, EU
Language : Engl, Fran, Deut, Espa, Ital
Flip LCD
27
28
More Information
More Information
EN
EN
The player does not respond to key
operations?
Turn the player off by removing the
Cannot playback tracks on the
player.
Troubleshooting Tips
The player does not turn on when
the PLAY button is pressed?
Note:
•
•
Make sure audio tracks are encoded
in the mp3 or Windows Media
formats at supported bitrates.
Bitrates support by the player:
mp3 – 32 to 320 kbps
Under some rare
circumstances, your unit
might report less memory than is
available for storing music files. If
this happens, format the device to
recover all the memory.
batteries. Reinsert the batteries
properly and turn the player on
again to resume normal operations.
•
•
Batteries may be inserted incorrectly.
Batteries may be empty.
wma – 48 to 192 kbps
Skipping tracks or bad sound
quality?
•
•
WMA files may be DRM protected
and you don’t have the proper rights (
license) to play the files.
Check the website and/or application
help system of the music download
service provider from where the
content was purchased from for
license acquisition details. For more
information on how license
•
•
•
Repeat, random or program function
may be activated.
There may be strong magnetic fields
(e.g. too close to TV) near the unit.
Low Battery level. Replace with new
ones.
Note:
This unit may temporarily
cease to function if
subjected to electrostatic
disturbance. To resume normal
operation, it may be necessary to
cycle the power off and back on or to
remove and reinstall the batteries.
Note:
For better result, we
recommend a constant encoded bit
rate from 32 to 320 kbps for mp3
and 48kbps to 192 kbps for
Windows Media Audio.
Cannot perform playback?
acquisition works, go to www
.microsoft.com/windowsmedia/drm.
•
•
LOCK function may be activated.
There may be no mp3 tracks in the
card or internal memory.
Warning:
!
Nevertheless, your unit may play
tracks encoded in variable bit rate
(VBR).
Formatting the device will
erase all stored contents.
Backup all the valuable files before
doing so.
What does the PlaysForSure logo
mean?
USB display does not appear when
connected to computer?
•
PlaysForSure is a new logo program
from Microsoft®. Consumers can
match the PlaysForSure logo on a
large selection of devices and online
music stores. If you see the logo,
you’ll know your digital media will
play for sure. For more information
on the Microsoft PlaysForSure
program, visit
•
•
Check connection between your unit
and the computer. ( Refer to the “USB
Driver Installation; MusicMatch
JukeboxTM Software” instruction
manual)
Check if the USB drivers are properly
installed ( Refer to the “USB Driver
Installation; MusicMatch JukeboxTM
Software” instruction manual)
29
30
Installing Software
Installing Software
Welcome Screen
EN
Preferred Language
Install the USB Driver
(Windows 98SE and Me Only)
EN
Insert the Included
CD-ROM into CD-ROM
Drive
If the setup screen does not appear,
double click My Computer, double click
your CD-ROM drive icon, and double
click Install to run the installer.
Select your preferred language, then click
Next to continue.
For Windows 98SE and Me systems, you
need to install a USB driver before your
computer can recognize your Lyra player.
Turn on your computer and place the
Music Management CD that came with
your Lyra Digital Audio Player into your
computer.
Note
The installation program will
detect whether your system
requires a USB driver. The program
will install the USB driver first,
restart the computer, and then
begin to install the necessary
software.
Note
Don’t connect the USB cable to the
PC or Lyra Digital Audio Player
before or during the driver
installation.
Note
•If you’re running Windows
2000/XP no additional drivers
are required.
•
If you’re running Windows
98SE/Me, you must install the
USB drivers from the CD-ROM in
order for the Lyra Digital Audio
Player to function properly.
32
31
Installing Software
Installing Software
Audible welcome
Click for additional information about
audible.
Rebooting the computer (Non-
Windows XP user only)
You may need to restart your computern
for software to run properly.
Install Necessary Software
Install MusicMatch Jukebox
EN
EN
Click Install, and follow the on-screen
MusicMatch Jukebox is a music
instructions to install all necessary files.
management software used to organize
and manage digital audio files and can
be used to transfer the music to your
Lyra Digital Audio Player.
1. Click Install to run the MusicMatch
setup program.
Installation completed
Install Additional Services
Click for additional digital music services
provided by our partners.
End User License Agreement
Installation is completed! You can go to
the manufacturer’s website for more
information or read the user manual
stored on the CD.
Please read the End User License
Agreement carefully, you can quit the
installation anytime if you do not agree
with it.
Wait while the installation program
begins. It may take up to 20 seconds
for the installer to start.
Click Accept to continue installation.
2. Follow the on-screen instructions to
setup and install MusicMatch Jukebox.
For more information on MusicMatch
Jukebox, click Tutorials on the CD or go
Note
It is recommended to uninstall
any previous installations of
the MusicMatch Jukebox software
before proceeding.
After the uninstall process has been
completed, delete the MusicMatch
folder found under C:\Program Files.
33
34
Getting Started
Transferring Music
EN
EN
Launch the MusicMatch
software
The MusicMatch software converts audio
files to the mp3, mp3PRO and WMA
formats so you can play them on your
Lyra Digital Audio Player.
2. Start the MusicMatch Jukebox
software (double click on the
MusicMatch icon in your system
tray or on your desktop).
Note
Attention
The Lyra Digital Audio
Do not disconnect the USB
cable or remove the memory card
during music download. Doing so may
corrupt system files or the files
being downloaded.
Player is capable of transferring
files at hi-speed mode of USB 2.0.
This is up to 40 times faster than
USB 1.1. If USB 2.0 port is available
on your computer, use it to connect
to your Lyra Digital Audio Player.
The Lyra player is still backward
compatible with the older USB 1.1
ports. However, you will not be able
to take full advantage of the
potential speed increase.
1. Remove the Music Management CD
from your computer.
The MusicMatch icon found in
your computer’s system tray.
Note
Transferring Music
Connecting the Player to
the Computer
Connect the Lyra Digital Audio Player to
your computer with the USB cable
provided.
Secure music download
files must be transferred to your
Lyra player through Windows Media
Player or the application
Turn on the unit , the Lyra Digital Audio
Player will appear as a Removable Disk
drive.
Transferring Files to the
Lyra Digital Audio Player
You can transfer files to your Lyra Digital
Audio Player via MusicMatch Jukebox or
via Windows Explorer.
recommended by the online music
download service. Please visit the
online music download service’s
website where you purchased your
content from for more details on
transferring secure music to your
player.
If your Lyra Digital Audio Player isn’t
already connected to your computer,
connect it to the computer using the
provided USB cable as illustrated on the
previous page.
For more information on Windows
Media Player, visit
The Player
Note
windowsmedia.
It might take several seconds for
the device (the Lyra Digital Audio
Player) to be detected, especially in
Windows 2000/XP. Click Refresh in
My Computer or Explorer to make
sure the device has been detected.
35
36
Transferring Music
Transferring Music
3. Click on Options and select your
From Windows Explorer, highlight all the
EN
EN
portable device under Select Device.
Click OK.
Your device should be listed under
Portable Device.
files/folders you want to transfer to your
Lyra Digital Audio Player and drag them
to the drive letter that is associated with
it.
Attention
Note
Make sure all data are
transferred to the Lyra
Digital Audio Player before
unplugging the USB cable.
Some wma files may be DRM
protected. You must acquire
licenses for DRM protected wma
files before they can be played on
the Lyra player.
4. Select the playlist item and drag it to
the active device listed under Portable
Device. Only those playlists saved in
step 1 are displayed on the playlist
window.
For more information, go to
windowsmedia/drm
Note
If you’re running Windows
2000 you must stop the
The songs in the playlist will now be
automatically transferred to your Lyra
Digital Audio Player.
device before unplugging it. Click
the icon (the Unplug or Eject
hardware icon) from the system
tray and select the USB Mass
Storage device for the drive letter
associated with the Lyra player, and
select the device you want to stop.
See the Windows Help for details
about the Unplug or Eject Hardware
topic.
Transfer Files via
MusicMatch Jukebox
1. Drag and drop desired tracks from the
Music Library to the Playlist display
and save the playlist.
During transfer a progress indicator
appears in the Portable Device Manager
screen, and "USB Transferring" flashes in
the Lyra player’s LCD.
Note
You must profile your contents after
file transfer in order for the new
files to appear in the Navigation
Menus.
Note
Be sure to save the playlist
or it will not be displayed on
the playlist window of the Portable
Device Manager screen.
Transfer Files via Windows
Explorer (Drag and Drop)
If your Lyra Digital Audio Player isn’t
already connected to your computer,
connect the Lyra Digital Audio Player to
the computer using the provided USB
cable as illustrated on page 35 and turn
on the unit.
2. From the menu area, select Files/Send
to Portable Device or click Send to
Portable under the copy item on the
left side of the MusicMatch Jukebox
screen to display the Portable
Device Manager screen.
37
38
File Management
Transferring Music
EN
EN
Disconnecting Your Lyra
from the Computer
The Stop a Hardware device screen
appears. Select the device to be stopped
again for confirmation and click OK.
System Tray Applications
Profile
New files that are transferred to your Lyra
Digital Audio Player using Windows
Explorer (drag and drop) will not appear
in the Navigation Menus until you profile
the contents.
4. Click Done when profiling is complete.
Note
Before disconnecting the USB cable
from the computer or the Lyra
Digital Audio Player, be sure the
"Safe to unplug" message is
displayed.
1. Connect your Lyra Digital Audio Player
to the computer using the provided
USB cable if it is not already
connected.
Attention
You can also stop your Lyra player by
Make sure all data are transferred
to the Lyra Digital Audio Player
before unplugging the USB cable.
right clicking on the
icon from the
system tray and selecting the drive
corresponding to your player.
2. Right click on the Lyra icon
in the
From the System Tray, double click the
left mouse button on the icon and select
Unplug or eject hardware. The Unplug or
Eject Hardware screen appears. Select the
drive corresponding to your Lyra player.
System tray (bottom right hand corner
of the computer screen.)
If you’re running Windows 2000 you
must stop the device before
unplugging it. Click the icon (the
Unplug or Eject hardware icon) from
the system tray and select the USB
Mass Storage device for the drive
letter associated with the Lyra
Digital Audio Player, and select the
device you want to stop. See the
Windows Help for details about the
Unplug or Eject Hardware topic.
3. Select the Profile Device Content...
item to start the profiling and sorting
contents.
39
40
Troubleshooting Tips
EN
Problem
Checkpoints / Action
After connecting the player to computer, "USB
connected" does not appear on the display.
•
Press ON button to power on the
player after connecting to the
computer.
Cannot access the player via Windows 2000
computer.
•
Install the Service Pack 3 for
Windows 2000.
Visit
to check for the latest updates.
Cannot playback tracks on the player.
•
•
Make sure audio tracks are encoded
in the mp3 or Windows Media
formats at supported bitrates.
Bitrates support by the player:
mp3 – 32 to 320 kbps
wma – 48 to 192 kbps
WMA files may be DRM protected
and you don’t have the proper rights
(license) to play the files.
Check the website and/or application help
system of the music download service provider
from where the content was purchased from
for license acquisition details.
For more information on how license
acquisition works, go to
What does the PlaysForSure logo mean?
PlaysForSure is a new logo program from
Microsoft®. Consumers can match the
PlaysForSure logo on a large selection of
devices and online music stores. If you see the
logo, you’ll know your digital media will play
for sure.
For more information on the Microsoft
PlaysForSure program, visit
41
|